Monday, February 1, 2010

Pioneer Premier 5000 Watt Spl 10 What Amp Do I Need For These??

What amp do i need for these?? - pioneer premier 5000 watt spl 10

2 Pioneer PREMIER 5000 Watt SPL 10 "CAR SUBWOOFERS SUBS

The SME is 1600 ..

1 comments:

sparky34... said...

You will be an amplifier with 3200 watts RMS with the ohm load need to have U-boats amplifiers.

The amplifier you need is the least of worries .....

If the system of total power 1200 watts RMS or more, you must:

1. Upgrade the alternator to a powerful generator
2. Upgrade to a heavy battery deep cycle
3. Upgrade the "Big 3" - to take the place (or add) the power wire between the battery and alternator is the mass of the battery to the chassis and the engine belt to the floor / Tranny chassis with at least 2 AWG son .

If they do not cause the premature death of the generator, since it will ultimately fail.

Here's a guide to the size of the generator and son power you need to calculate http://www.box.net/shared/uchv4dbk88

You will need Microsoft Excel. If you do not have Excel, use this link http://www.box.net/shared/nkkw1dhk4g

A second battery is never a good idea, because it is an attempt to calculate from the alternator to two batteries and powerfor the car. The only time a second battery is useful if the audio system for use with the car.

A capacitor is only valid until the sound is trying to throw too much cabling. A cap does not provide more power, seeks to "hard" the voltage at the amp, nothing else. When power is not there is a limit of no help.
The generator must be at least 20% more current in the entire vehicle and sound system for a ceiling on the benefits that have, ironically the same requirements connected to an amplifier, to be effective.

See my website for more information http://spkrbox1.spaces.live.com

Post a Comment